榮帥電機為GAIA在TAIWAN台灣地區獨家代理廠商

GAIA Converter has developed a series of test jig printed circuit boards intended to ease GAIA’s modular product testing and evaluation for your application.

The evaluation boards come with a service manual that includes board schematic diagrams, layout, bill of materials, and outlines a simple process by which to populate the prototyping test jig.

Six different prototype boards are available to support power levels from 8Watts up to 500Watts

• EVGTJ2020 -Input range 9 – 60Vdc /100Vdc transient 2x8W or 2x20W

EVGTJ2020 is a test jig that can be used to evaluate converters from the MGDD08 or MGDD21 series, along with the LHUG150N input bus conditioner, and the FGDS6A100 EMI filter. 

Testing can be performed with regards to the MIL-STD-1275, MIL-STD-704 and MIL-STD-461 military standards.

• EVGTJ2030 -Input range 9 – 60Vdc /100Vdc transient 40W or 280W

EVGTJ2030 is a test jig that can be used to evaluate converters from the MGDD40 or MGDD80 series, along with the LHUG150N input bus conditioner, and the FGDS12A100 EMI filter.

Testing can be performed with regards to the MIL-STD-1275, MIL-STD-704 and MIL-STD-461 military standards.

• EVGTJ2040 -Input range 9 – 42Vdc /100Vdc transient 160W

EVGTJ2040 is a test jig that can be used to evaluate a large range of converters from the quarter brick families of Gaïa-converter, along with filters, surge limiter and hold up modules.

Testing can be performed with regards to the MIL-STD-461, MIL-STD-704, MIL-STD-1275, DO160 avionic and military standards. The EVGTJ2040 enables evaluation of global power architectures.

• EVGTJ2050 -Input range 9 – 36Vdc /100Vdc transient 500W

EVGTJ2050 is a test jig that can be used to evaluate converters from the MGDM500 series, along with the FGDS35A100 EMI filter and LGDS600 Input Bus conditioner.

Testing can be performed with regards to the MIL-STD-461 and DO160 military standards.

• EVGTJ2060 -Input range 115Vac /400Hz 50W up to 3 outputs

EVGTJ2060 is a test jig that can be used to evaluate AC/DC converters from the HGMM35 or HGMM50 series, along with the MPGS14Eb Point of load.

Testing can be performed against Military standards MIL-STD-704, DO160, ABD100 and MIL-STD-461.
The board has also been designed in order to test separately up to 3 MPGS14EB with multiple sequencing modes.

• EVGTJ2070 -Input range 9 – 42vdc /100Vdc transient 200W battery charger 

Compliant with following standards:DO160 and MIL-STD-704

 

 

 

 

文章引用自Gaia Converter網頁資訊

https://www.gaia-converter.com/technical-support/evaluation-boards/