榮帥電機為PULS在TAIWAN台灣地區合作夥伴

An uninterruptible power supply is essential in certain industries: If manufacturing processes are disrupted due to power interruptions, high costs can be incurred. There is also a risk of data loss and damaged systems.

DC-UPS modules reduce this risk by bridging power outages or load fluctuations with the help of batteries or electrochemical double layer capacitors. However, in which applications which UPS type is needed depends on numerous factors.

 

PULS offers two buffer modules with different storage sizes: the UC10.241 with a 6kWs storage and the UC10.242 with 12kWs storage.

The units are designed for 24V systems and can be loaded with up to 15A in normal and buffer mode. Both units have a capacitor storage with built-in control electronics inside a compact, DIN rail mountable housing. The series connection of the individual capacitors is equipped with an active "balancer circuit", which benefits a long lifetime.

For monitoring and diagnosis, the unit is equipped with signal contacts and display elements. If buffering is not desired, this can be inhibited with the inhibit input.

For the application of DC-UPS modules with batteries, we offer two solutions using different devices:

The PULS device UB20.241 with the battery UZK24.121 keeps the output voltage stable at the set value of the buffer voltage in case of buffering. Values from 22.5V to 26V can be set, regardless of the battery voltage.

In contrast, the UB40.241 device with the UZK24.262 battery directly passes on the battery voltage at the output, minus a small voltage drop.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

文章引用自PULS GmbH網頁資訊(Nadine Schinko)

https://products.pulspower.com/en/blog/post/dc-ups-with-battery-or-capacitor